带式输送机

　　TD75型固定带式输送机是通用型系列产品，是以棉帆布、尼龙聚酯帆布及钢绳芯输送带作曳引构件的连续输送设备。TD75型胶带输送机具有输送量大、结构简单、造价低廉、维修方便、部件标准化程度高、便于实现输送系统自动化控制等优点。它广泛应用于矿山、冶金、发电、供热、煤炭等部门，输送松散密度为500-2500kg/m3的各种散状及成件物品。胶带输送机可在环境温度-20℃至+40℃范围内的使用，输送物料的温度在50℃以下。对于有防尘、防爆、防腐蚀要求的场合需要输送带可逆运行输送时，应另采取措施。
　　其传动装置可根据用户的要求选用电动滚筒或带驱动架的驱动装置。
　　其安装倾斜角度一般不得大于20°。
　　TD75 belt conveyor is a series of popular type product, its towing part is made up of cotton canvas, nylon and polyester canvas and steel cord conveyor belt and used for continuous transportation equipment. TD75- belt has the advantages of large amount of transmission, simple structure, low cost, easy to maintain, parts with high degree of standardization to achieve the automatic control of delivery system .It is widely used in mining, metallurgy, power generation, heating ,coal ,and other sectors, and transport a variety of bulk materials and items, the loose density of which is 500-2500kg/m3. Belt conveyor is used in the ambient temperature  of-20 ℃ to +40 ℃and distribute materials in the temperature below 50 ℃. On dust-proof, explosion-proof, corrosion resistant demands occasions, it should take other measures.
　　The gear can according to the requirements of users to choose roller-driven or with push bracket driver device
　　The tilt angle of its installation is not more than 20°generally.
　　主要型号及技术参数:
　　MAIN MODELS AND TECHNICAL PARAMETERS:
　　注：
　　1.表中输送量是在物料密度为1.0t/m3，输送机倾角≤18，物料堆积角为30的条件下得出。
　　2.可输送物料密度在2.5t/m3以下。
　　3.输送长度不局恨于表中所列值，可根据用户的需要进行制造。
　　Accessory:
　　1.The conveying quantity is worked out by the following conditions: material density
　　is between 1.0 t/m3-1.6 t/m3;conveyor obliquity is less than 18 and the material stockpile angle is 30.
　　2.Density of material is less than 2.5 T/M3.
　　3.The conveying length is not restricted to the form; different length can be manufactured according to customers’ demands.